65 Ton Triaxle Hydraulic Gooseneck E-Series TRANSPORTER
| Stock: FG-00815 | Manufacturer: Aspen |
| Deck Length: 23'-6" | Series: E-Series |
| Capacity: 65 Ton | Axles: 3 |
| Location: Leduc, AB | Availability: Available Immediately |
| Length: 53'-0" | Width: 8'-6" |
| Approximate Weight: 26,950 lbs |
Request More Info
Detailed Specs
Aspen
23'-6"
2026
E-Series
E-HG65-3
65 Ton
3
New
Available Immediately
53'-0"
8'-6"
26,950 lbs
Description
This Aspen 65 Ton E-Series Hydraulic Removable Gooseneck Lowbed is designed to operate as a multi-axle TRANSPORTER. It has swing clearances to suit a three or four axle tractor and is equipped with a gooseneck extension so it can operate with a tandem axle jeep. The rear frame is manufactured to accept a 20 Ton tandem axle hydraulic relieving pin-on booster.
Load Specification
130,000 lbs in 15′-0″ length
Gooseneck
Narrow Hydraulic Removable
Two Kingpin positions c/w Removable Pin
Hydraulic operated Gooseneck Support Arm
Shimmable Swing Stops to adjust Upper Coupler height
Main Frame
Double Drop Four Beam Flush design
Fully Fabricated High Yield Main Rails
Deck Camber to suit Maximum Rated Load
Low-Profile, Front-Loading Ramps c/w Grouser Bars
Pin-jointed Connection to Rear Frame
Rear Frame
Aspen Squaretail design
Depressed style Bolster Cross-members
Lugs for Tandem Axle Pin-on style Booster
One pair of Flag Holders c/w Aspen Wide Load Flags
One pair of D-Sign Holders installed on 29 1/2” centers
One pair of Aspen 24” Mud Flaps
Running Gear
Axles: Steel Hub, Cast Drum – Air Lift 3rd Axle
Wheels: Aluminum
Tires: 275/70R 22.5 On Highway Radials
Suspension: 75,000 lb. Air Ride c/w Shock Straps
Air System & Electrical
Regulated Air Override & Emergency Brake Release Valves mounted in protective Control Box
Air and Electrical Glad-hand Bracket
DOT 12V system, 7-way Connector with LED rubber grommet Lighting to meet US FMVSS & Canadian CMVSS
Paint
Sandblasted, Primed (two-part polyurethane high solids) and Painted Aspen standard color (two-part polyurethane Topcoat) with Conspicuity Tape to meet US FMVSS & Canadian CMVSS
Included Optional Equipment
Narrow Hydraulic Flip-over Gooseneck Extension
Dual Source Hydraulics: Wet Kit and Power Pack
Power Pack Door and Rear Enclosure Panels
Mud Flaps on Web mounted Hangers (No Aluminum Checker-plate Gooseneck Fenders)
One pair of Gooseneck mounted Swing-out Lights
One pair of Gooseneck mounted Rear Facing Work Lights
3″ Rough Fir Outer Decking
2″ Rough Fir Inner/Outrigger Decking
Swing-out Outriggers on 24″ centers c/w Pull-out Outriggers in the Front Ramps
Two pairs of D-Rings on Front Ramps
D-Rings installed on 48″ centers
Two pairs of Deck mounted Pull-up Chains
Two Bolt-in Chain Trays
Outboard mounted Chain Pockets on Bolsters
Auxiliary Battery for Strobe Lights
One pair of D-Rings on the Rear Frame
